FVB260 with push floor FDK and chip container structure | 2x FVB260 with push floor FDK |
The right solution for productive and economical briquetting. In addition to its extremely robust design, the FVB250 model series with 11kW and the FVB260 with 15kW drive output offers custom-tailored system solutions. The individual assembles, like the drive unit, press unit and push fl oor, can be set up in many diverse arrangements. The FVB250 / FVB260 offers an outstanding price/performance ratio, because the following equipment is provided by standard:
- PLC control unit M238 Schneider Electric, command input through 3.8 inch touch panel colored
- Password-protected input with classifi ed user rights
- Manual and automatic operation
- 5 available dosing recipes with fi lling time control and dosing time limit, briquette hardness and length control, and conveyor screw control inc. reversal
- Available machine confi gurations such as briquette container monitor, silo discharge, briquette strand measurement, coolant control and control for press mechanism cooling circuit
- Day and weekly timer, diverse level controls for silo
- Fault message with error logging, hours of operation recording
- Oil cooler with thermostat, oil temperature and oil level safety circuit
- Electrical hydraulic control unit for discharge
- Potential-free relay contacts for interfaces and remote displays
Data:
Briquette diameter | 61 mm |
Briquette length regulation | 30-120 mm |
Nominal output depending on chips | FVB250: 180-210 kg/h, FVB260: 200-260 kg/h |
Drive output with soft starter | 11 kW oder 15 kW, 1500 U/min |
Discharge drive output / oil cooler | 2.2 / 0.11 kW, 1500 / 2500 U/min |
Connected load | 3x 400 VAC+N+PE, 50 Hz |
Recommended pre-fusing | 40 Amp |
Hydraulic oil filling | 130 l |
Weight without oil | Hydraulic unit approx. 340 kg, press unit approx. 310 kg |
FVB 260 on a base frame | FVB 250 with push floor FDK, can be modified for a second briquette press |
Downloads |
German | English | French |