The FCB262 offers a convincing price/performance ratio because the following equipment is available as standard:
- PLC control S7-1200 from Siemens, command input via 4 inch color touch panel.
- Password-protected input with classified user rights.
- Manual and automatic operation.
- 5 preselectable dosing recipes with filling time control and dosing time limitation, briquette hardness and length control.
- Screw conveyor control including reversing.
- Available machine configurations such as briquette container monitoring, silo discharge, briquette strand measurement.
- Coolant control and control for cooling circuit press mechanics.
- Daily and weekly timer, various level controls for chip silo.
- Fault message with error evaluation, recording of operating hours.
- Oil cooler with thermostat, oil temperature and oil level safety circuit
- Electro-hydraulic control for discharge and material shifting.
- Connection terminals for external start-stop and emergency stop commands.
- Potential-free relay contacts for interfaces and remote displays.
The system can be easily moved with a pallet truck and can be optionally equipped with a lifting and tilting device for mobile containers. The construction of the moving floor is carried out according to customer requirements.
Technical information
Mission: | Aluminum wet pressing |
Briquette diameter: | 61mm |
Briquetting length control: | 30-120mm |
Nominal power depending on chips: | 230-290kg/h |
Drive power with soft starter: | 15 kW, 1500 rpm |
Drive power discharge / oil cooler: | 2.2 kW / 0.11 kW, 1500 rpm / 2500 rpm |
Connection value: | 3x 400 VAC+N+PE, 50 Hz |
Recommended back-up fuse: | 40 amps |
Hydraulic oil filling: | 130 liters |
Weight: | including oil filling 1,090 kg |
Chip container volume without structure: | 250 lt, W 800 x L 1420 x H 250 mm or as specified |
Filling height: | 760mm |
Examples of systems in use
