FM briquetting presses are first-class products and are equipped as follows:
- PLC control S7-1200 from Siemens, command input via 4 inch color touch panel
- Password-protected input with classified user rights
- Manual and automatic operation
- 5 preselectable dosing recipes with filling time control and dosing time limitation, briquette hardness and length control
- Screw conveyor control including reversing
- Available machine configurations such as briquette container monitoring, silo discharge, briquette strand measurement, coolant control and control for cooling circuit press mechanics
- Daily and weekly timer, various level controls for chip silo
- Fault message with error evaluation, recording of operating hours
- Safety circuit oil temperature and oil level
- Electro-hydraulic control for discharge and material shifting
- Connection terminals for external start-stop and emergency stop commands
- Potential-free relay contacts for interfaces and remote displays
Technical information
Briquette diameter: | 61mm |
Briquette regulation: | 30-100mm |
Nominal power depending on chips: | FKB90: 50-85 kg/h, FKB110: 70-110 kg/h |
Drive power with soft starter: | 5.5 kW or 7.5 kW, 1500 rpm |
Connection value: | 3x 400 VAC+N+PE, 50 Hz |
Recommended back-up fuse: | 25 amps |
Hydraulic oil filling: | 120 lt weight without moving floor and oil filling |
Drive unit: | approx. 230 kg, pressing unit approx. 250 kg |
Examples of systems in use
